Signed shirt showing tell-tale signs of poor framing...

Signed shirt showing tell-tale signs of poor framing...

This shirt came to us for repair - note the double sided tape hanging from the bottom

This is how the shirt has been stretched -

This is how the shirt has been stretched -

This tape will eventually dry out, and could permanently damage the fabric

The shirt was stapled by the 'framer' who did the work

The shirt was stapled by the 'framer' who did the work

Any future value in this shirt has been destroyed. The shirt has been permanently damaged by the staples.

Staples should NEVER be used when framing a shirt

Staples should NEVER be used when framing a shirt

This signed Glasgow Rangers shirt has been completely devalued by the 'framer' who did this, using staples and the wrong type of board support.

Masking tape has no place in a professional framing workshop

Masking tape has no place in a professional framing workshop

Masking tape should be used for keeping paint off windows, not for framing! This job has been done by someone who THOUGHT they knew what they were doing.

Masking Tape fixing the artwork to the mount

Masking Tape fixing the artwork to the mount

Masking tape should NEVER be used in a good quality framing job. Artwork should NEVER be attached directly to the front mount.

Cellotape should NEVER be used to fix artwork...

Cellotape should NEVER be used to fix artwork...

It will dry out, and eventually give way, causing damage to the artwork - in this case - an original piece.  Also notice the acid burn on the artwork - caused by poor quality mountboard.

The wrong tape has been used

The wrong tape has been used

to fix this artwork. Notice the damaging residue on the artwork.

Poor quality mountboard might be sold as 'Acid Free'

Poor quality mountboard might be sold as 'Acid Free'

Notice the 'Acid Burn' on the artwork - caused by poor quality mountboard breaking down. The only true 'Acid Free' mountboard is made from 100% cotton, not paper.

Cheap mountboard will damage your artwork

Cheap mountboard will damage your artwork

The calcium carbonate buffer in this mountboard has broken down, allowing the inherent acid to bleed onto and burn the artwork it is meant to protect.

Signed celebrity photos badly mounted

Signed celebrity photos badly mounted

A shocking example of valuable signed celebrity photographs mounted incorrectly, and attached using masking tape.

Artwork should be mounted onto a protective backing board

Artwork should be mounted onto a protective backing board

This expensive Limited Edition print has been endangered by being mounted directly onto an acid laden brown board. It's attached in completely the wrong way, with masking tape run the full width of the front of the print.

Frameless glass 'clip' frame

Frameless glass 'clip' frame

This original caricature by a well known artist was put into a glass 'clip' frame with no protection. Notice how the acid from the board has burnt through the paper, and irreversibly damaged the artwork.

Mounted using sub-standard board

Mounted using sub-standard board

This artist passed away a few years ago. His print was in grave danger of being irreversibly damaged by acid burn.

Frontpage Slideshow | Copyright © 2006-2011 JoomlaWorks Ltd.